Popular Posts

  • Working of McLeod Gauge
    McLeod Gauge McLeod gauge amplifies the low pressure and was developed to extend the range of vacuum measurement significantly.
  • Difference Between Synchronous And Asynchronous Sequential Circuit
    Sequential circuit is one of the major categories of digital logic circuits. Based on the clock input, it is further classified into synch...
  • FEEDFORWARD CONTROL vs FEEDBACK CONTROL
    Feedforward control and feedback control are the two predominant process control systems used in industries. Let's check the differenc...
  • Inferential Control - An Introduction
    Introduction Inferential control is a control scheme in which the controlled variable  (primary process variable)   is not measured dire...
  • OVERRIDE CONTROL
    Override Control Override Control, also called as selective control, is a form of multivariable control in which more than one controlle...
  • DECODER
    DECODER - INTRODUCTION The decoder is a combinational logic circuit used to convert a piece of coded information into another signal pa...
  • Flapper Nozzle System
    Flapper Nozzle System Pneumatic systems are still used in process control industries even after the entry and domination of electrical...
  • FEEDFORWARD CONTROL
    FEEDFORWARD CONTROL Feedforward control provides a direct solution to the control problem by measuring the disturbances and compensating...
  • ADAPTIVE CONTROL - AN INTRODUCTION
    Adaptive Control Adaptive control detects the changes in the characteristics of the process and adjusts the controller parameters auto...
  • DIFFERENCE BETWEEN COMBINATIONAL AND SEQUENTIAL CIRCUIT
    The digital logic circuits are classified into two major categories. They are,  (a) Combinational Circuits and (b) Sequential Circuits.  I...

Tell us your feedback about INSTRUMENTATION IN A NUTSHELL

Name

Email *

Message *